saw bandpass filter F4651 features z rf bandpass filter for cdma450 a-band rx. part z usable bandwidth 5mhz (462.5 mhz ~ 467.5 mhz) z high attenuation z no matching 50 single-ended operation z ceramic surface mounted device package ( 3.8 mm 3.8 mm ) z rohs compliant 44 5 3 2 1 5 66 3 2 1 1.270.1 0.640.1 1.900.1 1.000.1 1.400.15 3.800.15 3.800.15 package dimensions itf 4651 5a1 dimensions shown are nominal in millimeters pin configurations 2 input 5 output 1, 3, 4, 6 case ground body : al 2 o 3 ceramic lid : kovar, ni plated terminations : au plating 0.3 ~ 1. 0 um, over a 1.27 ~ 8.89 um ni plating maximum ratings parameters unit minimum typical maximum operating temperature range c -30 25 85 storage temperature range c -40 - 85 power handling capability dbm - - 27 electrostatics sensitive device ( esd) part no. F4651 rev. date 2006-06-08 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nr3014-as05 1/7
saw bandpass filter F4651 specifications minimum typical maximum unit center frequency ( fc ) - 465.0 - mhz insertion loss (in fc +/- 2.5 mhz) - 3.0 3.8 db amplitude ripple (in fc +/- 2.5 mhz) - 1.0 2.2 db vswr (in fc +/- 2.5 mhz) - 1.5 2.4 relative attenuation 0.3 mhz ~ 452.5 mhz 452.5 mhz ~ 457.5 mhz 485.0 mhz ~ 507.5 mhz 507.5 mhz ~ 1200 mhz 1200 mhz ~ 1700 mhz 45 35 40 35 25 1700 mhz ~ 2000 mhz 20 50 43 45 - - - - - - - - - db temperature range (operational) -30 25 85 input rf power (in fc +/- 2.5 mhz) 27 dbm input/output impedance 50 ohms notes : 1) all specifications are based on th e matching schematic shown below, measur ed by agilent network analyzer and full 2 port calibration. 2) electrical margin has been built into the design to accoun t for the variations due to temperature drift and manufacturing tolerances 3) all attenuation measurements are measured relative to insertion loss part no. F4651 rev. date 2006-06-08 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nr3014-as05 2/7
saw bandpass filter F4651 matching schematic ( actual matching values may vary due to pcb layout and parasitics ) input 50 output 50 marking configuration 1) itf 2) 4651 3) 5a1 4) 1) pad number 1 index 2) manufacturer name 3) marking number 4) lot number * ink or laser marking available part no. F4651 rev. date 2006-06-08 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nr3014-as05 3/7
saw bandpass filter F4651 typical performance ( at 25 ) ch1 s 21 log mag 10 db/ ref -2.469 db ch1 center 465.000 000 mhz span 100.000 000 mhz cor part no. F4651 rev. date 2006-06-08 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nr3014-as05 4/7 prm 16 dec 2003 20:36:09 1 2 3 4 5 5_:-2.0193 db 465.000 000 mhz 1_:-50.453 db 452.5 mhz 2_:-54.766 db 457.5 mhz 3_:-2.9722 db 462.5 mhz 4_:-2.2885 db 467.5 mhz ch2 s 21 log mag ref -2 db 1 db/ ch2 center 465.000 000 mhz span 30.000 000 mhz cor prm 16 dec 2003 20:38:21 1 2 2_: .6511 db 5.000 000 mhz ref=1 mean:-2.259 8 db s.dev: .2627 db p-p: 1.0159 db
saw bandpass filter F4651 input / output vswr charts part no. F4651 rev. date 2006-06-08 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nr3014-as05 5/7 ch2 s 11 swr ref 1 500 m / ch2 center 465.000 000 mhz span 20.000 000 mhz cor prm 17 sep 2003 11:15:42 ch2 s 22 swr ref 1 500 m / ch2 center 465.000 000 mhz span 20.000 000 mhz cor prm 17 sep 2003 11:17:27 input / output smith charts ch1 s 22 1 u fs ch1 center 465.000 000 mhz span 100.000 000 mhz cor prm 17 sep 2003 11:18:52 1 1_: 55.006 5.4688 1.8718 nh 465.000 000 mhz ch1 s 11 1 u fs ch1 center 465.000 000 mhz span 100.000 000 mhz cor prm 17 sep 2003 11:18:05 2.7832 1 1_: 55.402 952.6 ph 465.000 000 mhz
saw bandpass filter F4651 packing specification 1. reeling quantity : 3000 pcs / 13? reel ( or 1000 pcs / 7? reel ) 2. taping structure : the tape shall be wound ar ound the reel in the direction shown below. reel top cover tape carrier tape tape specification 1. leader part and vacant position specification end start tape running direction vacant 150mm min. component contained vacant 150mm min. leader part 250mm min. 2. tensile strength of carrier tape 4.4n/mm width 0~15 degree top cover tape direction of pull carrier tape 3. top cover tape adhesion 1) pull off angle : 0~15 2) speed : 300mm/min 3) force : 20~70g part no. F4651 rev. date 2006-06-08 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nr3014-as05 6/7
saw bandpass filter F4651 carrier tape dimensions [unit : mm] a 4.30 0.1 b 4.30 0.1 c 7.25 0.1 d 1.70 0.1 e 12.00 0.1 f 8.00 0.1 part no. F4651 rev. date 2006-06-08 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nr3014-as05 7/7 part direction tape running direction reel dimensions [unit : mm]
|
